The SCR-S G2 contactless card reader communicates with access control units using the OSDP™ communication protocol, which makes it easy to connect and use with access control systems that also use this standard protocol.
RFID card reader SCR-S G2
The SCR-S G2 contactless card reader communicates with access control units using the OSDPTM communication protocol, which makes it easy to connect and use with access control systems that also use this standard protocol.
The RFID capabilities and configuration options allow for a multitude of reading options and combinations using the 13.56MHz frequency. Using the SCR Configuration tool you can enable and disable what MIFARE® unique identifiers (UID) the reader will read, combine with up to five MIFARE Classic® or MIFARE Plus® cards with data programmed on a sector and/or up to five additional MIFARE® DESFire® data media programmed in an application.
SCR-S-G2 uses an RGB-type LED stripe and built-in buzzer to communicates statuses to the users.
The SCR-S-G2 can operate in a temperature range from -25°C to +70°C and the reader’s IP65 enclosure protection is dust proof and prevents ingress of low-pressure water jets from any direction in accordance with IEC 60529:2013 (Edition 2.2), Degrees of protection provided by enclosures (IP Code).
The built-in mechanical tamper switch protects against unwanted opening of the enclosure and can also be used for indication that the reader has been removed from its original place of installation. SCR-S G2 has been impact protection tested and complies with IK10 of IEC 62262:2002, degrees of protection provided by enclosures for electrical equipment against external mechanical impacts.
The SCR-S-G2 reader complies with the General Product Safety Directive 2001/95/EC, Radio Equipment Directive 2014/53/EU and the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU including the amended Annex II in 2015/863/EU (RoHS3) and thus fulfils the requirement for CE marking of the device.
To the SCR-S Mini G2 card reader, we have a range of accessories.
- Installation angle 15 degrees is used when the card reader needs to be mounted on a lower level for easy access by all users
- Mounting frame is recommended if the
mounting surface is uneven. The mounting frame can also be used as a distance for external mounting
- Vandal protection is a frame that redirects and absorbs power from side and front blows and protects the reader.
- Installation plate for vandal protection is used when the card reader is mounted on an uneven wall or on a metal surface.
from tampering and vandalism.
44280390 RFID reader SCR-S G2 without keypad and display
Power consumption Typical/MAX at 24V 50 mA/150 mA Operating temperature -40°C to +70°C Operating frequency 13.56MHz Enclosure protection IP65 Impact protection IK10 Dimensions (l/w/h) 76,5/45/20 mm Net weight 46 g LED-stripe type RGB Colour of reader NCS 8500-N (Black) Colour of installation plate NCS 6502-B (Grey) Communication interface/protocol RS485/OSDP™
- Product datasheets SCR-S G2 & Accessories